Make Your Own Cable
We no longer produce BC895 Cables but they are easy to make. Simply cut the end off of a standard 9pin serial cable and wire as shown below.

You can make your own cable for your BC895XLT, it is easy. The connector on the rear of your scanner has 5 pins, only 3 are needed, since the outside pins are shorted together and second to outside pins are shorted together.

Data Signal
9 Pin Serial Port 
25 Pin Serial Port 
BC895XLT Pin
Transmitted Data
3
2
1 or 5  
Received Data
2
3
2 or 4
Ground
5
7
3 center pin



Main Website